Contact-Responsive Robotic Interfaces

Passive Jamming for Adaptive Grasping

From compliant shape adaptation to stabilized grasping.

RoboSoft 2022 · IROS 2023 · IROS 2026

KIMLAB, University of Illinois Urbana-Champaign

Passive particle jamming supports object-adapted contact through a compression-driven mechanical transition.

Shape Adaptation
Contact-Driven Jamming
Stabilized Conformal Grasp

During initial contact, the compliant interface conforms to uncertain object geometry. Increasing compression then induces passive particle jamming, mechanically supporting the adapted contact and stabilizing the resulting grasp.

Abstract

Robotic grasping requires contact interfaces that can adapt to uncertain object geometry while remaining sufficiently stable under load. Here, we present a progression of passive adaptive grippers that use passive particle jamming effect as a contact-driven mechanism for transitioning from compliant shape adaptation to mechanically supportive grasping without external vacuum actuation. Beginning with a lip-inspired gripper that introduces local contact adaptation, the designs progressively incorporate geometric retention through teeth structures and global self-alignment for sloped and underwater objects. Together, these developments demonstrate how passive mechanical adaptation can improve grasp robustness across increasingly challenging contact conditions.

The Grasping Challenge

Robotic grasping demands two seemingly competing behaviors from the same contact interface. During initial contact, compliance is desirable because it allows the gripper to accommodate uncertain curvature, size, and local geometry. After the grasp is established, however, the interface must provide sufficient mechanical support to resist deformation, rolling, and slip. The challenge is therefore not simply to make a gripper softer or stiffer, but to enable the contact itself to transition between these behaviors.

When a rigid interface meets a curved or irregular object, contact may be limited to a small region, making the grasp sensitive to pose error and local surface variation. A more compliant interface can deform around the object and increase conformal contact, but compliance alone may not preserve that adapted contact once the object is loaded or disturbed.

The central question of this chapter is how to first conform to uncertain object geometry and then mechanically support that adapted contact during holding. Passive particle jamming provides this contact-driven transition: the interface conforms to the object during initial contact and progressively stiffens under compression, helping preserve the adapted contact against deformation and slip.

Compliance

shape adaptation

gentle, distributed contact

↔

Stability

load support

resistance to slip and disturbance

Can the contact itself transition from compliant to supportive?

Unknown Geometry

Rigid interfaces make limited contact with curved and irregular objects.

Soft but Unstable

Compliant interfaces conform to uncertain geometry, but the adapted contact can deform or shift when the object is loaded.

Contact-Driven Transition

We seek an interface that conforms first, then mechanically supports the adapted contact as compression increases.

Conceptual Core

Passive Jamming Principle

Passive particle jamming uses contact force itself to shift the interface from compliant adaptation toward mechanical support. Before strong contact, the particles can still rearrange within the membrane, allowing the surface to conform to local object geometry. As compression increases, the available space for particle rearrangement decreases, and inter-particle contact and friction increasingly constrain particle motion. The interface therefore becomes mechanically supportive while retaining the object-adapted contact geometry, helping stabilize the grasp without external vacuum actuation.

Compliant Contact Conform to Object Compression Passive Jamming Stable Holding
Passive jamming contact and force transmission overview

Contact-Driven Loading

When the pouch touches the object, external contact force compresses the particle-filled interface and begins building internal load paths through the particle network.

Passive jamming example during object grasping

Passive Grasping Example

The contact surface first deforms around the object to create broad conformal contact. With increasing compression, passive particle jamming develops within the pouch and the grasp becomes more mechanically supportive while preserving the conformed shape.

Passive jamming state transition from compliant contact to jammed support

From Compliant Contact to Mechanical Support

Before strong compression, particles remain relatively free to rearrange and help the surface adapt to local geometry. As the contact load increases, the denser particle network offers stronger resistance to deformation and provides greater support.

Design Motivation

Animal oral contact combines conformal adaptation with retention during grasping.

Human lips softly conform to an object while helping stabilize the grasp.

These observations motivated the early lip-inspired designs, where compliant contact and increasing support were reproduced mechanically through passive particle jamming.

Design Evolution

Local Adaptation
Geometric Retention
Global Self-Alignment
Lip-inspired passive jamming gripper

Design 1

Lip-Inspired Passive Jamming Gripper

Local Contact Adaptation

Can passive jamming provide adaptive contact without active stiffness control?

Inspired by the compliant yet supportive behavior of animal lips, particle-filled lip pouches were introduced as adaptive contact interfaces.

The compliant pouches deform around local object geometry during initial contact. As compression increases, passive particle jamming stiffens the particle network around the adapted shape, helping preserve the conformal contact and stabilize the grasp.

Adaptive contact improves conformity, but an object can still roll or escape when the grasp lacks geometric retention.

Passive jamming gripper with teeth structure

Design 2

Passive Jamming Gripper with Teeth Structure

Local Adaptation + Geometric Retention

How can adaptive contact also retain the object geometrically?

Inspired by oral geometry around canine and carnassial teeth, rigid teeth-like features were added around the passive jamming lip pouches. The jamming lips adapt to local object geometry and maintain conformal contact under compression, while the rigid teeth create grasping spaces and physical barriers that constrain object escape. Together, these complementary mechanisms combine local shape adaptation with geometric retention, improving grasp stability without requiring a more complex active grasping mechanism.

Geometric retention improves object containment, but local contact adaptation alone cannot correct large-scale orientation mismatch on sloped surfaces.

Waterproof passive adaptive gripper

Design 3

Waterproof Passive Adaptive Gripper

Local Adaptation + Global Self-Alignment

What if the entire contact orientation is misaligned with the object surface?

This design extends passive adaptation from the local contact surface to the overall contact orientation with a passive rotational joint.

The passive rotational joint aligns the overall contact face with sloped surfaces, while particle-jamming pads conform locally and become mechanically supportive under compression. Waterproof integration enables these passive mechanisms to operate in submerged, low-friction environments.

Experiments and Results

Conformal Grasping across Diverse Geometries

The passive jamming lip pouches conform to objects with different sizes, curvatures, and local geometries, enabling stable holding across a wide range of everyday objects.

Adaptive Contact with Geometric Retention

The combination of compliant lip pouches and rigid teeth structures helps retain objects within the grasp while preserving local shape adaptation.

Robust Grasping on Sloped and Underwater Objects

The passive rotational joint self-aligns the contact interface with sloped surfaces, while the jamming pads maintain conformal support under reduced-friction underwater conditions.

Papers

These publications document the research progression from local contact adaptation to geometric retention and global self-alignment.

1. Lip-Inspired Passive Jamming Gripper

@INPROCEEDINGS{hong2022lip,
  author={Hong, Jooyoung and Mathur, Dhruv C and Kim, Joohyung},
  booktitle={2022 IEEE 5th International Conference on Soft Robotics (RoboSoft)},
  title={Lip-Inspired Passive Jamming Gripper},
  year={2022},
  pages={306-311},
  doi={10.1109/RoboSoft54090.2022.9762187}}

2. Lip-Inspired Passive Jamming Gripper with Teeth Structure

@INPROCEEDINGS{hong2023lip,
  author={Hong, Jooyoung and Shin, Kazuki and Mathur, Dhruv C and Yamsani, Sankalp and Yim, Joohee and Kim, Joohyung},
  booktitle={2023 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)},
  title={Lip-Inspired Passive Jamming Gripper with Teeth Structure},
  year={2023},
  pages={4518-4524},
  doi={10.1109/IROS55552.2023.10342175}}

3. Robust Underwater Grasping of Sloped Objects with a Waterproof Passive Adaptive Gripper

@inproceedings{hong2026,
  author    = {Hong, Jooyoung and Hong, Daewon and Kim, Joohyung},
  title     = {Robust Underwater Grasping of Sloped Objects with a Waterproof Passive Adaptive Gripper},
  booktitle = {2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)},
  year      = {2026},
}

Acknowledgments

This work was partially supported by Toyota Research Institute (TRI).